| Model |
CYG-500/600 |
CYG-500/600 |
| Maximum Griding Length |
500/600 |
500/600 |
| Maximum Height of Centre |
130 mm |
150 mm |
| Maximum Swing over Bed |
259 mm |
299 mm |
| Maximum Grinding Diameter |
100 mm |
100mm |
| Table Feeds |
Mechenical |
Mechenical |
| Number of Table Feeds |
4 |
4 |
| Range of Table Feeds / Minute |
150,280,450 & 700 mm |
120,245,385& 645 mm |
| Maximum Table Swivel |
7"+ 3"=10" |
6" + 3"=9" |
| Workhead Swivel on Either Side |
90" towords Wheelhead & away Form Wheelhead |
| Workspindle Speeds |
4 |
4 |
| Workspindle Speeds Range |
65,140,205& 300 Rpm |
65,140,205& 300 Rpm |
| Taper in Workspindle |
NO.3 Morse |
NO.3 Morse |
| Taper in Tailspindle |
NO.3 Morse |
NO.3 Morse |
| Maximum to and Fro Swivel of wheelhead |
60" Towards Workhead & 45" towards Tailstock |
| Maximum Transverse Movment of wheelhead |
125 mm |
125 mm |
| Size of Gridning Wheel |
354 x 25 x127 mm |
407 x 25 x 203 mm |
| Minimuum Dia of Wornout Wheel |
205 mm |
254 mm |
| RPM of Grinding Wheel |
1700 , 2000 |
1500, 1750, 2000 |
| Maximum Internal Grinding Depth |
150 mm |
150 mm |
| Minmum & Maximum Dia of Internal Grinding Wheeel |
12-40 mm |
12-40 mm |
| Minmum & Maximum Dia of Hole For Grinding |
50-18 mm |
50 - 18mm |
| Power Required for Coolant Pump |
0.7 KW |
0.7 KW |
| Power Required for Table Drive |
0.37 Kw |
0.75 Kw |
| Power Required for Workhead |
0.37 Kw |
0.75 Kw |
| Power Required for Internal Attechment |
0.75 Kw |
0.75 Kw |
| Power Required for Wheelhead |
2.2 Kw |
3.7 Kw |
View larger
